/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
* File Name          : readme.txt
* Author             : MCD Application Team
* Version            : V2.2.0
* Date               : 06/13/2008
* Description        : Description of the USB Mass_Storage Demo.
********************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*******************************************************************************/

Example description
===================
The Mass Storage Demo gives a typical example of how to use the STM32F10RBT6 USB
peripheral to communicate with the PC host using the bulk transfer.
This demo supports the BOT (bulk only transfer) protocol and all needed SCSI
(small computer system interface) commands, and is compatible with both Windows
XP (SP1/SP2) and Windows 2000 (SP4).

More details about this Demo implementation is given in the User manual 
"UM0424 STM32F10xxx USB development kit", available for download from the ST
microcontrollers website: www.st.com/stm32


Directory contents
==================
 + \include: contains the Demo firmware header files
 + \project: contains pre-configured projects for RVMDK, EWARM5, RIDE toolchains
 + \source: contains the Demo firmware source files


Hardware environment
====================
This example runs on ET-STM32F103(RBT6) Board. + Micro SD Memory
    
How to use it
=============
 + RVMDK
    - Open the MassStorageSimpleBuffer.Uv2 project
    - In the build toolbar select the project config:
        - ET-STM32F103 : to configure the project
    - Rebuild all files: Project->Rebuild all target files
    - Load project image: Debug->Start/Stop Debug Session
    - Run program: Debug->Run (F5)    

 + EWARM5
    - Open the MassStorageSimpleBuffer.eww workspace.
    - In the workspace toolbar select the project config:
        - ET-STM32F103 : to configure the project
    - Rebuild all files: Project->Rebuild all
    - Load project image: Project->Debug
    - Run program: Debug->Go(F5)

 + RIDE
    - Open the MassStorageSimpleBuffer.rprj project.
    - In the configuration toolbar(Project->properties) select the project config:
       - ET-STM32F103 : to configure the project
    - Rebuild all files: Project->build project
    - Load project image: Debug->start(ctrl+D)
    - Run program: Debug->Run(ctrl+F9)  

******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE******
